Bull BBQ · Parts & Accessories
Bull BBQ Replacement Parts and Accessories Guide
Bull sells replacement parts through its dealer portal and authorized service centers — the serial number on the drip tray is the fastest route to the right part. For covers, insulated jackets, and griddle plates, size and series are the two things you have to match.
By Reed · Updated November 8, 2026
What you need
- Flashlight (for finding the serial plate)
- Phone camera (for photographing the serial plate)
- Tape measure (for cover and jacket sizing)
- Owner's manual (or the part number from a prior order)
Step by step
Find the model and serial number
Bull's FAQ names the drip tray as the default location for the model and serial plate on every grill. For non-grill items (side burners, pizza ovens, griddles), the plate is typically on the back or sides. Photograph the plate before you order — the serial number is required for warranty-covered parts.
Decide if you need a cover, a jacket, or an interior part
Covers protect the exterior and fit by size and series. Insulated grill jackets are the stainless sleeves that drop a built-in head into a combustible countertop — a safety requirement, not a cosmetic accessory. Interior parts (burners, flame tamers, grates, ignitors, regulators) are matched to the serial number and ordered through the dealer portal.
Match the cover to the series and mount
The 30-inch premium cover is the single most-ordered Bull cover because it fits the Angus, Lonestar Select, and Outlaw — the three best-selling 30-inch heads. The 38-inch cover fits the Brahma 5-burner. The 24-inch fits the Steer and Steer Premium. Built-in and freestanding versions exist for each size because the cart base changes the cutout at the bottom.
Match the insulated grill jacket to the series
The 30-inch jacket fits the Angus, Lonestar Select, and Outlaw. The 38-inch jacket fits the Brahma and Renegade. Jackets are required by UL when you install a Bull head into a combustible-material countertop — read the install manual, not a forum, for the clearance numbers.
Order through the dealer or service center
Bull routes replacement-parts orders through authorized dealers and service centers, both of which are listed at bullbbq.com/service-centers and /local-dealers. Have your serial number, the part number if you have it, and a photo of the failed part ready. Warranty-covered parts require proof of purchase per Bull's registration flow.
Hands-on tips
- Keep a spare grease cup on the shelf — $12 beats cancelling a party because the current one rotted over winter.
- Replace the stainless grill brush every spring. A pack of two costs less than $20 and you won't be picking bristles out of a rib-eye.
- If you own an Angus, the removable stainless griddle plate replaces two cooking grates and turns the main cook surface into a flat top for breakfast or smash-burgers — no separate griddle required.
- Keep a backup igniter battery in the drawer; most Bull electronic ignitions take a single AA or AAA.
Questions people ask
Where do I find my Bull grill's model and serial number?
Per Bull's FAQ, most grills have the model and serial plate on the drip tray. For side burners, pizza ovens, and non-grill items, check the back or side panel of the unit.
Can I buy Bull replacement parts directly from Bull?
Bull routes most parts orders through authorized dealers and service centers, both searchable at bullbbq.com/service-centers. Have your serial number and proof of purchase ready if the part is warranty-covered.
What's the difference between a grill cover and an insulated grill jacket?
A cover is outdoor fabric that protects the exterior while the grill is stored. An insulated jacket is a UL-listed stainless sleeve that wraps a built-in head when it's installed in a combustible countertop — it is a code requirement, not a cover upgrade.
Can I use a generic replacement burner in a Bull grill?
No. Bull burners are matched to the regulator and orifice on each model. A dimensionally close generic burner will often misfire, produce uneven flames, or push heat toward the control panel. Order the OEM burner through the dealer portal.
Does Bull sell parts outside the United States?
Yes — Bull Europe, Bull New Zealand, and the Bull Factory Outlet are listed as official distribution channels on bullbbq.com. International buyers should order through the regional distributor, not the US dealer network, because voltages and gas standards differ.
Was this guide helpful?
Shopping for Bull BBQ?
See Bull BBQ products
