Coyote Outdoor · Installation
Coyote Outdoor Kitchen Cutout Dimensions Reference
A single-source table of cutout widths, depths, and clearances for every Coyote built-in product. Confirm these against YOUR model's specific PDF before cutting — Coyote updates specs between generations. This page is a starting reference, not a final spec.
By Reed · Updated November 9, 2026
What you need
Coyote Built-In Cutout Reference
- C3C30 (3-burner 30 in)
- 30 1/4 x 22 1/2 in
- C3C34 (3-burner 34 in)
- 34 1/4 x 22 1/2 in
- C3CL36 (4-burner 36 in lift-assist)
- 36 1/4 x 22 1/2 in
- C3CL42 (5-burner 42 in lift-assist)
- 42 1/4 x 22 1/2 in
- C3SL30 (3-burner 30 in SL)
- 30 1/4 x 22 1/2 in
- C3SL36 (4-burner 36 in SL)
- 36 1/4 x 22 1/2 in
- C3SL42 (5-burner 42 in SL)
- 42 1/4 x 22 1/2 in
- C3HY50 (50 in hybrid)
- 50 1/4 x 22 1/2 in
- C3FTG30 (30 in flat top)
- 30 1/4 x 22 1/2 in
- C3PB (power burner)
- see model PDF
- C115R-S (15 in refrigerator)
- 15 1/4 x 23 1/2 in
- C121R-S (21 in refrigerator)
- 21 1/4 x 23 1/2 in
- C124R-S (24 in refrigerator)
- 24 1/4 x 23 1/2 in
Step by step
Match your model to the table
Find your SKU number in the specs table below. Note the cutout width + depth. Cross-check against your specific PDF install guide.
Confirm clearance to combustibles
Every cutout assumes non-combustible surround material (stucco, stone, metal). Combustible framing requires the insulated jacket.
Allow service space below
Even if you don't need a drawer under the grill, leave 6 inches of clear space for drip-tray access + eventual repair.
Common mistakes
- Using a generic 'built-in grill cutout' from a design magazine. Every manufacturer has different specs. A Weber cutout doesn't fit a Coyote.
- Not leaving service space. Future you will need to pull the drip tray. Leave the space.
Hands-on tips
- If you're designing an outdoor kitchen before buying the grill, work BACKWARDS from the biggest product you might ever install. A 50-inch hybrid cutout accommodates smaller grills; the reverse isn't true.
- Print the cutout PDF at 1:1 scale and tape to the counter before cutting. Catches measurement errors before they cost $500.
Questions people ask
Where's the definitive cutout spec?
Your specific model's install PDF, downloaded directly from coyoteoutdoor.com. This page is a starting reference only.
What about freestanding versions?
Freestanding (-FS) versions don't need a cutout — they're cart-mounted. But if you ever re-mount into a surround, use the built-in cutout.
What's the earliest I need to know the cutout?
Before you pour concrete, frame a surround, or commit to a counter material. Retrofits around a bad cutout are the #1 outdoor-kitchen cost overrun.
Was this guide helpful?
Shopping for Coyote Outdoor?
See Coyote Outdoor products
