Firegear Outdoors · Accessories
Firegear Kalea Bay See-Through Conversion Kit Installation
The See-Through Conversion Kit opens the back of a Kalea Bay LED fireplace so flame is visible from both sides — turning the fireplace into a divider between two outdoor rooms. Available for LED and Battery models. Install at the time of fireplace install; retrofitting later means pulling the fireplace.
By Rob · Updated November 8, 2026
Editorial review · November 8, 2026
What you need
- Phillips + flat screwdrivers
- Framing modifications to open the rear wall
Step by step
Confirm the See-Through kit matches the fireplace size
The kit is sized to the fireplace (36/48/60/72). The wrong size will not fit.
Frame the rear opening to match
The rear of the fireplace needs an opening framed to the same rough dimensions as the front.
Follow the kit's assembly diagram
The kit changes the rear glass and the internal baffles. Follow the diagram order exactly — components need to go in in a specific sequence for the ventilation to work.
Common mistakes
- Not planning for wind across both openings. A See-Through fireplace is more wind-sensitive than a single-side unit. Confirm both openings are in sheltered locations.
Hands-on tips
- The See-Through model has extra LED wiring — route it where it stays accessible for service.
Questions people ask
Was this guide helpful?
Shopping for Firegear Outdoors?
See Firegear Outdoors products